Before The Installation Team Arrives
A little preparation saves time on the day and helps us finish the job neatly. Please clear the area around the vanity or bathroom wall so the installer can work safely and take accurate marks. If old mirrors, cabinets or fittings are still in place, let us know beforehand so we can plan the removal properly.
For homes in coastal areas like Durban North, Umhlanga and Ballito, it is also worth checking for damp patches, salt build-up or flaking paint. These issues can affect the wall finish and may need a quick repair before the new mirror goes up. If your bathroom has just been tiled or painted, make sure the surface has had enough time to dry fully.
- Remove toiletries, towels and loose decor from the work area
- Keep children and pets away from the fitting zone
- Make sure the floor around the vanity is dry and accessible
- Tell us about any fresh tile work, plumbing changes or electrical repairs
What We Need Checked On Site
Our team will confirm the wall size, mirror position and electrical point before any drilling starts. This is especially important for custom mirrors, oversized pieces and replacement work where the old fixing points may not line up. In many Durban homes, bathrooms have been renovated more than once, so checking the exact wall structure helps avoid surprises.
We also confirm clearance around taps, splashbacks, shaving sockets and cupboards. If your mirror includes lighting or demister features, the connection point must be suitable and easy to access for future servicing. Where required, we will advise on a better location before installation begins.
- Wall width and height measured in millimetres
- Position of the basin, taps and tile joints
- Electrical point location and cable route
- Any nearby switches, shaver points or lighting controls
Electrical Safety And Load-Shedding Planning
LED-lit mirrors need a proper electrical connection, and all work should be treated as a safety matter, not a quick guess. If the bathroom wiring is old, overloaded or tucked behind damaged tiles, tell us before the fitting date so we can plan the right support. Our installation lead will check the practical side of the job and advise where an electrician may be needed.
In areas where load-shedding and voltage swings are part of daily life, customers often ask about protection for lights and demisters. A good quality connection and correct switching help reduce nuisance faults and make servicing simpler later on. If you have a backup power setup, mention it when booking so we can work with the existing system correctly.
- Do not switch on loose or exposed wiring
- Let us know if the bathroom point is shared with other fittings
- Tell us about any inverter or backup supply in the home
- Ask about repairs if your current LED or demister has stopped working
What Happens During Fitting Day
Most installations start with final measurements and a quick check of the wall finish. Once the fixing points are confirmed, the mirror is positioned, levelled and secured. If the model includes lighting, the electrician or qualified installer will connect the unit according to the agreed plan. After that, we test the lighting, check the switch operation and inspect the finish.
For replacement work, we remove the old mirror or existing unit carefully where access allows. We also check that the new piece sits true against the wall and that the final line works with the vanity, basin and tile pattern. The aim is a neat result with no unnecessary patching or guesswork.
Our team working on your appointment may include Sibusiso Nxumalo, Ayesha Naidoo, Lungile Mthembu, Johan van Rensburg, Nokuthula Dlamini or Calvin Petersen, depending on the type of job and where in KwaZulu-Natal we are scheduled that day. We keep communication direct and practical from booking through to sign-off.
Aftercare, Cleaning And Small Repairs
Once your mirror is fitted, proper care helps it stay looking good for years. Use a soft cloth and a mild cleaner, then dry the surface to prevent spots. Avoid harsh abrasives, strong solvents or rough sponges on the frame, glass edges and light sections. In humid bathrooms, regular wiping is better than heavy scrubbing done once in a while.
If you notice a flicker, a loose fitting or a problem with the demister after installation, contact us early. Small issues are usually quicker and cheaper to sort when they are reported straight away. We also assist with LED component repairs and mirror replacement where a unit has been damaged by moisture, impact or a faulty connection.
- Wipe the mirror after steamy showers to reduce water marks
- Keep ventilation running where possible to limit condensation
- Report any movement, buzzing or uneven lighting promptly
- Ask about servicing if the mirror is in a rental unit or guest bathroom
Booking In Pinetown And Nationwide
We work from Pinetown, Durban and assist bathroom fit-outs across South Africa. If you are based in Westville, Hillcrest, Durban North, Umhlanga or Ballito, we can usually arrange a site visit or fitting schedule that suits the project timeline. For bulk supply, interior projects or replacement orders, please share the quantity, mirror sizes and your preferred delivery area.
To help us quote correctly, send your measurements, a photo of the bathroom wall and a short note on the electrical point. If you are unsure about anything, ask before the appointment rather than on the day. It saves time and helps us bring the right tools and fixings. For practical support, send a message through our contact form and we will take it from there.
